Home arrow Tips and Tricks arrow Use a roller to apply to stencilled concrete surfaces
Main Menu
Home
Why seal concrete?
Surface Preparation
How to Apply
Coverage Rates
Tips and Tricks
FAQ's
Contact Us
Downloads

 
Use a roller to apply to stencilled concrete surfaces Print E-mail
One of the things you must look out for when applying Concrete Guard is that it is not allowed to pool in recessed areas. 


With stencilled concrete, the space between the pattern objects is at a deeper level than the surface of the sprayed patern.  This depth is due to the masking tape that is laid down (before the stencil is applied) and then removed once the coloured concrete has been applied.

So how do you avoid pooling of the sealer?  Avoid using an airless spray gun in this circumstance.  Apply with a roller brush instead.  The knapp of the roller will draw back any excess sealer from the recessed areas and makes it easier to achieve an even uniform coverage of Concrete Guard.